Axles
high loader:

low loader:

• The pickup guide plate is shaped to collect all the crop.
• Ideal pivotting action and countersprings make the pickup extremely adaptable to uneven ground.
• Hydraulic pickup lift system has two cylinders; one at each end.
• The pneumatic pickup wheels can be adjusted 8-fold and are located precisely at the tine contact point. A freewheel mechanism protects the tines during reversing.
• Countersprings at each end guarantee the best possible ground hugging.

PONY and BOSS-junior have 4 rows of tines and a pickup 1.55 m wide.

• Five rows of tines on LADE/ERNTEPROFIs and 1.65 m wide pickup.
• The speed of the tine movements is synchronised with the speed of the loading system.
• The closely spaced tine sequence ensures that the crop is lifted cleanly even at high loading speeds.
• The tines are bolted onto gauge tubes. Heavy-duty "Super C"-quality tines have a longer service life. The tubes are supported in the middle by a support disc, right where the stress is highest.
• The height-adjustable rubber wheels contact the ground on exactly the same line as the tines and guide the pickup perfectly through each hollow.
• The pickup transmission with integrated clutch disengages automatically when the pickup is raised.
• A height-adjustable pickup guide plate ensures that even really short forage is not left behind.
• The fine-tuned countersprings absorb shocks and prevent the pickup from sinking in on damp ground.

• Because the loading comb bars are split in the middle the stress is distributed over more cam rollers and a larger cam control surface.
• The wide conveyor duct protects the crop and guarantees highest loading performance.
• Each knife cuts the crop exactly between the dual tines.
• The cam tracks at each end are circular and ensure smooth, jolt-free running and a long service life.
• The pickup and loading system are equipped with automatic transmission for reversing.

	PONY 1 / 2 Two / three loading comb bars, supported in the middle, cam track at one end. U-shaped feed tines also load short forage reliably
	BOSS Junior Three split loading comb bars, cam track at each end, six-phase conveying and cutting sequence.
	BOSS / ERNTEBOSS Three split loading comb bars, cam track at each end, twelve-phase conveying and cutting sequence. Every other pair of tines is shortened so there are two levels of chopping to save power.
	PROFI GP / ERNTEBOSS Four split loading comb bars, cam track at each end, sixteen-phase conveying and cutting sequence. Loading system is equipped with a central lubrication system.

Often copied - never equalled Perfect serrated blades ensure that even after the knife edge is blunt a good chop is still achieved. The curved knife shape delivers a continuous, power-saving cut. The blanket of forage is always cut with precision to protect the crop. SUPERMATIC knife security system: If an object triggers the security system, there is only minimal resistance as the knife moves back (up to 13 cm clearance), and then clicks into place again.

22 knifes (BOSS, ERNTEBOSS)

PONY 7-knife cutting system, can be removed and fitted quickly, without tools. Curved knives provide the best cutting action. BOSS Junior Up to 12 quick-change knives. Remove catch, swing back or remove quick-change knife unit. BOSS L T up to 16 knives BOSS/ERNTEBOSS up to 22 knives Low-loader: Top knife bank: 12 quick-change knives. Lower knife bank: 10 knives, central pivoting knife configurations: 1-12 or 10 - 22 knives High loader: Top knife bank: 4 quick-change knives + 8-knife-bank (= 12). Lower knife bank: 10 knives Knife configurations: 1-4 / 10 / 12 / 14 / 22

PROFI Grand Prix / ERNTEBOSS 31 knives. Top knife bank: 4 quick-change knives + 12-knife-bank (= 16). Lower knife bank: 15 knives. Knife configurations: 1-4 / 12 / 15 / 16 / 19 / 27 / 31